The dB Technologies DVX D10 HP Speaker is a bi-amped active speaker that is equipped with a 600W RMS Digipro G2 module and SMPS. It features an integrated DSP which carries out various tasks, such as controlling the power amp, serving as an active equalizer, x-over, and high-pass filter. The DSP also performs audio setup tasks, such as aligning phases and delay time, and controlling the limiter. The LF transducer is a 10" woofer with a 2.5" voice coil whereas the HF transducer is a 1" compression driver with 1.75" voice coil on a 90 x 70° CD-horn. This rotatable high-frequency horn provides clean and constant directivity. Thanks to the low-power dissipation design, the cooling of the amplifier module does not require a fan. To help keep the drivers cool, all high-frequency horns are made of aluminium.
The DVX D10 HP is made of 12mm birch plywood. For easy transportation, the speaker features an on-top handle, six fly-tracks, six M10 threads, and two fly-pins located on the sides of the speaker. The standard aluminium pole-mount cup (Ø36mm) in the bottom of the box lets you to use this speaker on a subwoofer or a speaker stand.
Features
What's in the box
Specifications
| Speaker Type | 2-way active speaker |
| Frequency Response | 70 Hz to 20 kHz, -10 dB 85 Hz to 19 kHz, ±3 dB |
| Maximum SPL | 127 dB |
| Drivers | HF: 1.0" (2.5 cm) Voice Coil HF: 1.75" (4.45 cm) Directivity: 90 x 70° Horn: CD horn aluminum LF: 10.0" (25.4 cm) Voice Coil LF: 2.5" (6.4 cm) |
| Amplifier | Amp Technology: Digipro G2 Amp Class: Class-D Power PRG: 600 W Peak Power: 1200 W |
| Processor | Controller: DSP 24-bit/48 kHz System Presets: flat, monitor Limiter: RMS, peak, thermal, multiband Crossover Frequency LF-HF: 1650 Hz Slope MF-HF: 24 dB/Octave |
| Housing | Multiplex birch plywood |
| Angle | Monitor use 45°, Up |
| Rigging Points | 6 x M10; 2 x 0.4" (1.0 cm) quick release for DTF-bracket |
| Dimensions | 11.42 x 20.10 x 12.20" (29.0 x 51.1 x 30.9 cm) |
| Weight | 34.8 lb (15.8 kg) |