The INGENIA IG3T 2-Way Active Speaker from dB Technologies features 2 x 10" woofers, a 1.4" compression driver, and is equipped with a 900W RMS Digipro G3 digital amplifier. It combines high power, lightweight design, and SMPS technology with PSU auto-range. It is equipped with an infrared system in the two handles on top and bottom sides. The horn of the INGENIA IG3T is horizontally symmetric and vertically asymmetric (narrower in the upper part and wider in the lower). The DSP doesn't act only on the compression driver, but also on woofers, ensuring maximum intelligibility and transparency in the whole frequency range.
Features
What's in the box
Specifications
System Specifications | |
---|---|
Speaker Type | 2-way active speaker |
Acoustic Specifications | |
---|---|
Frequency Response | -10 dB: 53 to 20000 Hz -6 dB: 57 to 19200 Hz |
Maximum SPL | 132 dB |
High Frequency Drivers | Size: 1.4" (3.5 cm), 3" (3.6 cm) voice coil Directivity (H x V): 110 x 90° (20 /-70°) Type: Neodymium compression driver |
Horn | Vertical asymmetric |
Crossover Frequency | 1100 Hz |
Low Frequency Drivers | Size: 2 x 10.0" (25.4 cm), 2.5" (5.1 cm) voice coil Type: Neodymium |
Amplifier | |
---|---|
Technology | Digipro G3 |
Class | Class D |
RMS Power | 900 W |
Peak Power | 1800 W |
Processor | |
---|---|
Controller | DSP 56-bit |
Converter | AD / DA: 24-bit / 48 kHz |
Limiter | Dual active peak, RMS, thermal |
Input | |
---|---|
Signal Input | 1 x Combo IN (XLR + Jack 6.3 mm) |
User Interface | OLED display and rotative knob with switch |
Signal Output | 1 x XLR link out |
Service Port | Mini USB |
Connector | Mains: New Neutrik NAC3PX |
Features | |
---|---|
Positioning | Self-rotating display Accelerometer Infrared communication and display mirroring 10 / 5 / 0 / -5 / -10° digital steering |
Equalizer | Acoustic correction (Low / high shelving, mid attenuation) Microphone HPF and notch filter (variable frequency) |
Delay | On Board: Stage Alignment: 49.2' (15.0 m) System Delay: 143.4' (43.7 m) |
Mechanics | |
---|---|
Housing | Polypropylene PP reinforced |
Grille | Full / invisible screws; flyable |
Handles | 1 x Top 1 x Bottom |
Pole Mount | Standard D36 mm |
Dimensions (W × H × D) | 11.02 x 31.73 x 15.47" (27.99 x 80.59 x 39.29 cm) |
Weight | 49.0 lb (22.2 kg) |