Dbx 480M DriveRack RTA Mic for DriveRack

  • Sale
  • Regular price $599.95
Shipping calculated at checkout.

The 480M from dbx is a measurement microphone intended for large and small room calibration. The ultra wide frequency response of 9Hz to 27kHz is flat throughout the entire spectrum, and results in accurate room calibration using Smaart, MLSSA, SIMM and TEF based systems.
The small element yields an omni-directional pattern resulting in a wide pick up area at the front and sides of the microphone capsule.
Miniature Omni-directional Capsule
The miniature element provides an accurate omni-directional pattern with an even coherent response at the direct and off-axis sections of the microphone capsule
Wide Linear Frequency Response
The wide, linear frequency response accurately captures audio signal and reproduces the slightest nuance with great detail
Uncolored Response
The uncolored, flat signal results in accurate room calibration for indoor and outdoor application
  • Transducer: Condenser
  • Polar Pattern: Omnidirectional
  • Frequency Response: 5Hz to 30kHz, +1/-3dB
  • Dynamic Range (Typical): Not specified by manufacturer
  • Signal-to-Noise Ratio: 27dB SPL equivalent (A-weighted)
  • Maximum Input Sound Level: 150dB
  • Power Requirements: +48V phantom, 10mA
  • Output Impedance: 600Ω
  • Output Connectors: XLR, intended to drive a balanced transformerless input, pin 2+
  • Pad: No
  • Low Frequency Roll-Off: No
  • Dimensions: 9" long (229 mm)
  • Weight: 0.5 lb (225 g)