dbx

Dbx Driverack PA+ Crossover Effects

  • Sale
  • Regular price $499.00
Shipping calculated at checkout.



A reliable loudspeaker management system that optimizes your sound.
 
The dbx DriveRack PA+ is a powerful 1RU Loudspeaker management processor, packed with all-inclusive dynamics, EQ and Real Time Analysis processing for the professional on a budget. The unit essentially replaces a rack full of gear, and utilizes an intuitive user interface to control independent channels of processing power.
Among some of the DSP featured is a linkable 28-Band Graphic equalizer, a dbx stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input section.
 
The six-channel DriveRack PA+ output system includes parametric EQs, peak limiters (which provide protection against speaker blowouts) and an alignment delay. In combination with the Wizard setup system, the unit represents a methodical design capable of delivering optimal, all-inclusive PA processing in small and mid-sized venues.
 
Features
  • Setup Wizard steps through speaker and amp selection and levels
  • Auto EQ™ Wizard with 28-Band RTA tunes your system for the venue
  • AFS® Wizard welps eliminate feedback
  • Stereo Feedback Elimination with 12 feedback notch filters
  • dbx 120A sub-harmonic synthesizer
  • Classic dbx input compression
  • JBL® speaker and Crown® power amp tunings included
  • USB firmware and speaker tunings field updatable with Harman HiQnet™ System Architect
  • Full time RTA function
  • Front-panel output mutes
  • Pink Noise Generator (used with Auto EQ and Auto Level Wizards)
  • Linked stereo DSP processing for ease of use
  • 24-Bit ADC/24-Bit DAC, >113dB dynamic range
  • 2-Channel XLR input and 6-Channel XLR output
  • 2x3, 2x4, 2x5, 2x6 crossover configurations
  • Dual 28-band Graphic EQ- linked or dual mono
  • Stereo Multi-band parametric EQ
  • Stereo output limiters
  • Output alignment delay
  • Power on/off mute circuitry
  • Front-panel RTA-M XLR input with phantom power
  • 25 user programs/25 factory programs
  • Full graphic LCD display
  • Front panel input and output meters
Specifications
  • Frequency Response: 20Hz - 20kHz, +/- 0.5dB
  • Dynamic Range 
    • A/D:
      • 110dB A-weighted, 107dB unweighted
    • Type IV:
      • 123dB with transient material, unweighted, 22kHz BW
      • 121dB with transient material, unweighted, 22kHz BW
      • 115dB typical with program material, A-weighted, 22kHz BW
    • D/A:
      • 112dB A-weighted, 110dB unweighted
      • System: 110dB A-weighted, >107dB unweighted
    • Note: Figures above based on 48kHz sampling rate
  • Input Connections 
    • 2 x 3-pin XLR Female, Line
    • 1 x XLR RTA Microphone
  • Output Connections: 6 x XLR Male, Line
  • Input Impedance: >40k ohms
  • Output Impedance: 120 ohms
  • Maximum Input Level: +20dBu (Line)
  • Maximum Output Level: +20dBu
  • Sample Rate: 48kHz
  • RTA Mic Phantom Voltage: +15VDC
  • Crosstalk (Main Outputs) 
    • Interchannel: >110dB min, 120dB typical
    • Input to Output: >+100dB
  • THD & Noise: 0.002% typical at +4dBu, 1kHz, 0dB input gain
  • Dimensions: 19 x 5.75 x 1.75" (482.6 x 146.05 x 44.45mm)
  • Weight: 5.5 lb (2.5 kg)