M-Audio Pulsar II Small Diaphragm Studio Condenser Microphone, Matched Pair

  • Sale
  • $299.99
  • Regular price $399.99
Shipping calculated at checkout.

The matched pair of Pulsar II small diaphragm condenser microphones by M-Audio feature gold-sputtered Mylar ¾" diameter diaphragms. They also feature Class A FET transformerless electronics and brass bodies with internal shockmounts. Each microphone has a cardioid polar pattern, focusing on sources to the front and rejecting sound from the sides and rear. 
Each Pulsar II microphone has a switchable 10dB pad and a switchable low cut filter at 80Hz. The matched pair includes a stereo mounting bar, hard mounts, risers, windscreens, and soft bags. A wooden travel case is also included to contain and transport the microphones and all accessories.
  • Two response-matched M-Audio Pulsar II microphones
  • 0.75" diameter, 6-micron sputtered gold diaphragms
  • Cardioid pickup patterns
  • Class A FET transformerless electronics
  • Brass bodies with internal shockmounts
  • Switchable 10 dB pads and 80 Hz filters (18 dB/octave)
  • 48 Volt phantom power required
  • Includes stereo bar, hard mounts, risers, wind screens, and soft bags—all in a wooden travel case
  • Type: Small diaphragm condenser
  • Capsule: Gold-sputtered Mylar
  • Capsule Diameter: 0.75" (19 mm)
  • Polar Pattern: Cardioid
  • Frequency Response: 20 Hz to 20 kHz
  • Sensitivity: 13.8 mV/Pa (-37 dBV ref. 1V/Pa)
  • Maximum SPL
    • 134 dB < 0.5% threshold level
    • 144 dB SPL with 10 dB pad engaged
  • Equivalent Noise: 15 dB (A-weighted)
  • Output Impedance: 300 to 600Ω
  • Recommended Load Impedance: 1kΩ to 2.5kΩ
  • Topology: Class A FET, transformerless
  • Power Requirement: 30V to 50V Phantom power
  • Connector: 3-pin XLR
  • Dimensions (Ø x L): 0.87 x 5.2" (22 x 132 mm)
  • Weight: 4 oz (115 g)
Note! All specs are for a single microphone